Water damage restoration

Encircle vs DocuSketch vs magicplan vs CompanyCam: what each checks before the invoice goes out

By Muhammad Furqan Abid
Published · 7 min read

The short answer

Encircle and magicplan describe documenting the full water job: photos, moisture readings, drying logs, floor plans and equipment. DocuSketch is built around 360° capture, sketches and estimates, and its site lists dedicated drying logs as planned. CompanyCam is photo first. As of 17 Nov 2026, none of the four vendor pages states that it compares the drying log to the invoice before it goes out.

Title card: Encircle vs DocuSketch vs magicplan vs CompanyCam, what each checks before the invoice goes out

Every claim about a product below comes from that vendor's own website, opened on 17 November 2026. Where a cell says "Not stated," the vendor page does not state that feature as of 17 Nov 2026. The product may still do it, so ask the vendor if it matters to you.

Why does the choice of app matter on a water job?

Because the file is what gets paid. A desk reviewer reads your logs, photos and equipment counts, often without seeing the job. If the file can't prove a day, that day is at risk.

The money per claim is not small. Triple-I lists the average amount paid per homeowners claim for water damage and freezing at $15,400, a weighted average for 2019 to 2023, with ISO as the source.

We covered what the file has to prove in why adjusters cut drying days. This post is about which app captures which part.

What does each app document?

Here is the comparison, one line per thing a water job file needs. "Not stated" means the vendor page does not state it as of 17 Nov 2026.

  • Photos. Encircle: photos, videos, 360 and notes. DocuSketch: 360° capture with the DS1 camera, plus Timelines for return visits. magicplan: photos attached in the project. CompanyCam: time-stamped, location-tagged photos and video.
  • Moisture readings and drying logs. Encircle: drying logs, moisture maps, psychrometric readings. DocuSketch: dedicated drying logs listed as planned ("expected in Summer 2026"), and its site does not state a release as of 17 Nov 2026. Its drying log guide describes photographing meter readings and tying them to the 360° tour. magicplan: readings logged on the floor plan, dry logs. CompanyCam: not stated.
  • Floor plans and sketches. Encircle: Encircle Floor Plan from a smartphone video (add-on). DocuSketch: sketch built from 360° capture, compatible with Xactimate and Cotality. magicplan: sketch the space and draw affected areas. CompanyCam: not stated on the restoration page; the pricing page lists "Measure rooms without leaving camera" on the Scale plan.
  • Equipment tracking. Encircle: drying equipment on moisture maps, plus an S500 air mover and dehumidifier calculator. DocuSketch: not stated. magicplan: log each unit with usage, location and deployment times. CompanyCam: not stated.
  • Reports. Encircle: hydro reports with moisture maps, psychrometric readings, equipment calculations and time-stamped meter photos. DocuSketch: instant scope of work report, photo reports. magicplan: report and ESX export to Xactimate. CompanyCam: PDF photo reports.

Which app is better for moisture readings and drying logs?

On their own sites, Encircle and magicplan are the two that describe drying logs today.

Encircle. Its Hydro module guides techs through an S500 checklist. Its OCR reads temperature and relative humidity from a photo of the meter and adds them to the drying log. It calculates dew points and vapor pressure. Encircle says it alerts users "if a reading looks off or a chamber isn't drying."

magicplan. Readings are logged directly on the floor plan. Color-coded zones show what is wet and what is drying, day by day. You can build drying checklists for your crew. The scope exports as an ESX file that opens in Xactimate.

DocuSketch. Its water mitigation page says its current focus is 360° documentation, sketching and estimating. It says dedicated drying logs and moisture tracking are planned, with drying log functionality "expected in Summer 2026." Its What's New page, checked 17 Nov 2026, does not state that drying logs have shipped. Its drying log guide describes techs photographing moisture meter readings, tying them to the 360° tour, and generating a PDF report. Ask them what has shipped since.

CompanyCam. Its restoration page is about capturing, organizing and sharing photos. As of 17 Nov 2026, the page does not state moisture readings or drying logs.

Which app is better for sketches and equipment?

For sketches, three of the four describe it. Encircle turns a smartphone video into an Xactimate-ready floor plan, and says floor plans arrive in 2 hours on average. DocuSketch builds a sketch from 360° capture. magicplan lets techs sketch on site.

For equipment, magicplan describes logging each piece "from dehumidifiers to air movers," with usage, location and deployment times. Encircle adds drying equipment to moisture maps and calculates how many air movers and dehumidifiers the chamber needs under S500.

What does each one check for you?

Each vendor describes some kind of check. They check different things.

  • Encircle: alerts when a reading looks off or a chamber isn't drying, plus job alerts so you can monitor drying progress from your desk. Its Scope to Estimate plan lists "scope quality to catch missed documentation."
  • DocuSketch: AskAiME reviews estimates against carrier-specific requirements before submission.
  • magicplan: drying checklists and SOPs your techs follow on each job.
  • CompanyCam: checklists you can standardize across teams, on its Crew plan and above.

What can still fall through before the invoice goes out?

The gaps that cost money sit between the field log and the bill. As of 17 Nov 2026, none of the four vendor pages we read states that it compares the drying log to the invoice line by line before it goes out.

Here is what to check on every water job before the equipment comes out. Each item is sourced in our earlier post.

  1. A reading for every day equipment was on site, weekends included.
  2. A dry standard reading on unaffected material.
  3. Final readings at or below that dry standard.
  4. A log that runs to the day the equipment was pulled.
  5. Equipment counts on the invoice that match the placement photos and the log.
  6. Photos wide enough to show which wall the meter is on.
  7. A signed work authorization and a signed certificate of completion or satisfaction.

Some of these live in your documentation app. Some live in your job management system or a folder. If one is missing on day 3, the tech can still take the reading. If it is found after the job closes, the fans are gone.

What does it cost?

All four publish pricing pages. Each one prices in a different way, so compare on your own job volume.

  • Encircle prices by how many jobs you run per year, on a 12-month term. Every plan includes unlimited users and storage.
  • DocuSketch sells monthly packs by properties per month, with 360° tour credits and sketch credits.
  • magicplan plans start at 10 new projects per month, with unlimited users. Extra projects are $40 each.
  • CompanyCam prices by plan, with a set number of users included. Its Core plan includes 1 user and its Crew plan includes 3, and additional users cost extra.

Prices change. Check each pricing page before you decide.

What sits on top of whatever app you use?

The app holds the data. Someone still has to look at every open job each morning and ask what's missing.

That is what Invitrex builds for water damage restoration companies: A morning file check that reads open jobs and texts the tech what's missing while the fans still run. It works on top of the app you already use.

You can start with a free first step we call "Check on their last 10 closed jobs." We go through the last 10 jobs your company closed before you commit to anything.

The guarantee: Live on your jobs in 14 days or you pay nothing. If it hasn't paid for itself in 90 days, setup money back.

More on our water damage restoration work, including the guarantee.

Last updated: 17 November 2026

FAQ

Questions about this topic.

See every question

On their own sites, Encircle describes drying logs, moisture maps and an S500 equipment calculator today. DocuSketch focuses on 360° capture, sketches and estimates, and lists dedicated drying logs as planned. As of 17 Nov 2026, its site does not state that they have shipped.

Daily readings with no blank days, a dry standard, final readings at or below it, a log that runs to the pull date, equipment counts that match, clear photos and signed paperwork.

CompanyCam's site describes time-stamped photos, PDF photo reports and checklists. As of 17 Nov 2026, its restoration page does not state moisture readings or drying logs, so check with them.

Yes. Its site says you can log each piece of equipment with usage, location and deployment times.

No. It is built to sit on top of the app you already use.